A moving head wash gives you colour that covers people rather than a hard beam that picks them out. The Fusion 260ZR MKII carries 19 quad-colour LEDs behind a 6 to 50 degree motorised zoom, so the same fixture works on a low village hall bar or across a school hall from the back. Pan, tilt, zoom and colour all sit on DMX. It hires at £20 per day, dry or with a technician.
The Equinox Fusion 260ZR MKII is an LED moving head wash built around 19 quad-colour RGBW emitters, set in three concentric rings behind a motorised zoom running from a tight 6 degrees out to a 50 degree flood. That range is what makes it useful in real rooms. Pull the zoom in for a narrow shaft of colour across a stage, or open it wide to cover a dance floor from a low bar without hard edges.
Colour mixing runs from soft pastels to deep saturates. Dimming is 0 to 100 per cent with four selectable curves, and the head gives 540 degrees of pan and 270 degrees of tilt on 16-bit positioning.
Four DMX modes suit most desks: 2, 8, 17 or 25 channels. Eight channels covers pan, tilt, zoom, master dimmer and RGBW, which is plenty for a school or community rig. Twenty-five channels opens the three LED rings separately for chases and pattern effects. Auto, sound-active and master/slave modes are there when no desk is available.
DMX is 3-pin XLR in and out, mains is PowerTwist in and out, and up to six fixtures can be power linked from one run at 240V. Each head draws 290W and weighs 9.7kg, so it rigs on a standard bar with a clamp and a safety bond. Fans are temperature controlled and reasonably quiet for the output, though this is still a fan-cooled moving head, so think about placement over quiet dialogue. Indoor use only.
Hire by the day, on its own or with a technician to rig, patch and operate.
What you get
The fixture, with a mains lead
Omega clamp brackets as supplied with the unit — tell us what you are rigging to and we will confirm the hook clamps
A safety bond for any overhead position: ask when you book if you do not have your own
DMX cabling to link fixtures and reach your desk — let us know the distances and we will sort the run
Not included as standard: lighting desk, stands or truss, and a DMX terminator. All can be added
A technician to rig, patch, focus and operate, if you would rather not run it yourselves
Good for
School and academy annual shows where the hall bar needs colour as well as coverage
Dance school showcases: saturated back light that changes with each number
Youth theatre and am-dram productions wanting movement and colour without a full spot rig
Village halls and low stages, where the zoom has to open wide to cover from close range
Prize-givings, awards evenings and school discos in a sports hall
Adding a few moving fixtures to an existing generic rig for one production
What you need to know
What it does
A moving wash light: colour that covers people rather than a hard beam that picks them out, on a head that pans and tilts from the desk.
Beam
Motorised zoom from a tight pool to a wide wash, so one fixture covers a soloist or a whole stage without being re-rigged.
Power
290 watts. Up to six can be linked from one mains run.
Control
DMX. Eight channels covers pan, tilt, zoom, dimmer and colour, which is plenty for a school rig. There is an auto and a sound-active mode if you have no desk.
Where it goes
9.7 kg, so it hangs on a standard bar or stands on a floor plate. No special rigging.
Check availability
See whether this is free for your dates. This is an indication from our current bookings, not a reservation.
Alternatives
Equinox Fusion 300FXP — the same zooming wash idea with a pixel-ring party trick — chases and eye-candy effects as well as flat colour.
Martin Mac 250 Krypton — the budget moving spot — cheap enough per head to hire as a matched rig of several.
Full technical specification (26)
Manufacturer and model
Equinox Fusion 260ZR MKII
Order code
EQLED453
Fixture type
LED moving head wash
Weight
9.7
Power draw
290
Dimensions
414 x 324 x 221 (H x W x D)
LED configuration
19 x 12W RGBW quad-colour LEDs, arranged in three concentric rings
Zoom / beam angle
6° to 50°, motorised
Output
40,098 lux at 2m at 6°; 6,316 lux at 2m at 50° (full on)
Pan and tilt
Pan 540°, tilt 270°, 16-bit positioning with auto-correction
DMX channel modes
2, 8, 17 or 25 channels, selectable
8 channel mode
Pan, tilt, zoom, master dimmer, red, green, blue, white
25 channel mode
Adds pan/tilt fine, pan/tilt speed, strobe, individual RGBW control of each of the three LED rings, show programs, colour macros, colour program speed and reset
Control modes
DMX, auto, sound active, master/slave, forward-facing show modes
Up to 6 fixtures at 240V from one run (including the first fixture); 3 fixtures at 120V
Connectors
PowerTwist mains in/out; 3-pin XLR DMX in/out
Cooling and noise
Temperature-controlled fans; 44.7dBA at 1m
Display
LCD with 4-button menu
Rigging
Two omega clamp brackets; square hole spacing on the receivers allows clamps to be mounted in any orientation
Environment
Indoor use only; no IP rating published
Manufacturer packed size and weight
460 x 420 x 350mm, 11kg
Common questions
It is a wash. The output is soft-edged colour that covers people and scenery rather than a sharp beam, and there is no gobo wheel. If you want patterns, breakups or a hard edge, pair these with a moving head spot or a profile and let the washes do the colour.
Most likely. The 8-channel mode gives you pan, tilt, zoom, dimmer and RGBW on eight faders, which almost any desk can patch. There is also a 2-channel mode with built-in show programmes and a sound-active setting if you have no DMX control at all. Tell us what desk you have and we will say honestly whether it will cope.
Each fixture draws 290W. Up to six can be power linked from a single run at 240V, counting the first one, but the circuit at your venue is the real limit. School halls and village halls vary a lot. Send us the number of fixtures you are planning and we will help you work out the runs.
Each head weighs 9.7kg, so one person can rig it, but the bar has to take the load and the fixture needs a clamp and a safety bond. Check the rated capacity of your bar before you plan positions. These are indoor fixtures only, with no weather rating, so they cannot go outside.